Occupational Health

Protecting against noise-induced hearing loss: Choosing the proper protection for your team

A guide to safeguarding employees from permanent hearing damage caused by workplace noise exposure, covering legal responsibilities, noise reduction solutions, and PPE selection.

Contents

What's inside this guide

This whitepaper from Opus Safety addresses safeguarding employees from permanent hearing damage caused by workplace noise exposure. It covers five key areas:

  • Understanding noise-induced hearing loss impacts
  • Recognising legal responsibilities
  • Implementing best practice noise reduction solutions
  • Selecting appropriate employee protection equipment
  • Overcoming PPE adoption challenges

The guide promotes occupational health programmes combining health surveillance, risk management, and employee support to exceed compliance standards.

Noise-induced hearing loss protection whitepaper cover
Blog

Health & safety insights

Guidance, updates and practical advice for your sector.

Health and safety software site inbox listing corrective actions, an incident, a near miss and checklist reminders for a demo site
Opus consultant in a hard hat and hi-vis vest checking mobile access platforms against a document inside a building under construction
Opus consultant crouching to inspect a gas-powered forklift truck in a warehouse, with its gas cylinder, trailing cables and taped floor markings nearby
A trainer presenting an IOSH course module on assessing risks to a small group around a meeting room table
Chemical containers on a steel table in a store, labelled with red-bordered hazard pictograms including flame, exclamation mark and health hazard symbols
An office workstation with an adjustable mesh chair, a monitor, keyboard and mouse on a wooden desk
A warehouse worker standing on an order picker places a cardboard box on a high racking shelf, while a colleague in the aisle behind holds a box up to a shelf
Weathered corrugated cement roof sheeting on an older building, seen close up along the ridges
A consultant in a hi-vis vest checking pallet racking in a warehouse, a document in hand
Blog

How to choose health and safety software: what to check before you buy

How to choose health and safety software: the records the law expects, how long to keep them, protecting health data and what to ask a supplier.

Blog

What is a method statement? RAMS explained, and what a good one contains

A method statement sets out how a job will be done safely. What RAMS means, when the law expects a written plan and what a good one contains.

Blog

What is a hazard? Meaning, types and how to identify hazards at work

A hazard is anything that could cause injury or illness at work. What the word means, how it differs from risk, the main types and how to find them.

Blog

How to tell whether a health and safety consultant is genuinely competent

What qualifications should a health and safety consultant have? What regulation 7 of the MHSWR 1999 asks, NEBOSH and IOSH levels, and how to check them.

Blog

What is COSHH? What the regulations cover and what they require

COSHH stands for Control of Substances Hazardous to Health. What the 2002 Regulations cover, the nine hazard symbols and each duty in order.

Blog

DSE assessments: the duty and doing it at scale

DSE means display screen equipment. What a DSE assessment must cover under the 1992 Regulations, home and hybrid workers, and doing it at scale.

Blog

Manual Handling Operations Regulations 1992: duties, assessment and TILE

The Manual Handling Operations Regulations 1992: avoid, assess and reduce hazardous handling. What TILE stands for, and whether a weight limit exists.

Blog

Duty to manage asbestos: who holds it, and what it requires

Whoever is responsible for maintaining or repairing non-domestic premises holds the duty to manage asbestos. What regulation 4 requires and when to survey.

Blog

Best occupational health providers for UK employers in 2026: six compared

Six UK occupational health providers compared by fit: national clinic networks, safety-critical medics, SME specialists and on-site surveillance.

Blog

What a retained health and safety service includes

A retained health and safety service means ongoing access to a competent person. What it includes, what it can exclude, and what stays your legal duty.

Checkmark Icon
BMF Preferred Supplier
Ex-Regulators (HSE / Local Authority)

Ready to strengthen your compliance

Book a consultation or request a gap analysis to see where you stand

IOSH Approved | 100+ Businesses Using Cloud

No Commitment
No hard sell
We'll tell you where gaps are
Live platform, no slide decks