Home
Blog
Lone working policy: what the law requires and what to include
9
min read

Lone working policy: what the law requires and what to include

Published on

November 16, 2026

Ian Hatherly
Director
Ian Hatherly
A worker in a hard hat and hi-vis vest, alone on a building site under fit-out, checking an open service cupboard with a stepladder inside
Table of Contents
Speak with an Opus Safety expert
Get in touch
TL:DR
  • No law requires a document called a lone working policy, but the duties behind one are mandatory. In Great Britain, regulation 3 of the Management of Health and Safety at Work Regulations 1999 requires you to assess the risks to anyone who works alone, and section 2 of the Health and Safety at Work etc. Act 1974 requires you to control them so far as is reasonably practicable.
  • Once you employ five or more people, you must record the significant findings and your arrangements, and a lone working policy is a practical place to keep them.
  • HSE defines a lone worker as someone who works by themselves without close or direct supervision, which covers shop and warehouse staff on their own, cleaners and security staff out of hours, homeworkers and mobile workers.
  • HSE's INDG73 says there is no legal requirement for a separate lone working risk assessment. The risks to lone workers belong in your general risk assessment.
  • HSE lists high-risk work where at least one other person may need to be present, including work in a confined space and work near exposed live electricity conductors.

No law requires a document called a lone working policy, but the duties behind one are mandatory. In Great Britain, regulation 3 of the Management of Health and Safety at Work Regulations 1999 requires you to assess the risks to anyone who works alone, and section 2 of the Health and Safety at Work etc. Act 1974 requires you to control those risks so far as is reasonably practicable. Once you employ five or more people, you must also write down the significant findings and your arrangements, and a lone working policy is a practical place to keep them.

HSE defines a lone worker as "someone who works by themselves without close or direct supervision". Its guidance for employers, Protecting lone workers (INDG73), says it will often be safe to work alone, and that the law requires you to think about and deal with the health and safety risks before people are allowed to do so.

Do you need a lone working policy?

The law sets the duties, and the policy is how you show you have met them. These are the duties that apply to lone work in England, Wales and Scotland.

DutyWhere it comes fromWho it applies to
Ensure the health, safety and welfare at work of your employees so far as is reasonably practicable, including the training and supervision they needSection 2 of the Health and Safety at Work etc. Act 1974Every employer
Make a suitable and sufficient assessment of the risks, lone work includedRegulation 3 of the Management of Health and Safety at Work Regulations 1999Every employer
Record the significant findings, and any group of employees the assessment identifies as especially at riskRegulation 3(6) of the Management of Health and Safety at Work Regulations 1999Five or more employees
Make arrangements to plan, organise, control, monitor and review your preventive measures, and record themRegulation 5 of the Management of Health and Safety at Work Regulations 1999Every employer makes them. Five or more employees record them
Set procedures to follow in the event of serious and imminent dangerRegulation 8 of the Management of Health and Safety at Work Regulations 1999Every employer
Prepare a written statement of your health and safety policy, with the organisation and arrangements for carrying it out, and bring it to employees' noticeSection 2(3) of the Health and Safety at Work etc. Act 1974Five or more employees

Regulation 3(6) of the Management of Health and Safety at Work Regulations 1999 matters for lone working. If your assessment identifies the people who work alone as a group especially at risk, the record must include that group.

INDG73 confirms there is no legal requirement for a separate lone working risk assessment. The risks to lone workers belong in your general risk assessment, with the steps you take to control them. A lone working policy then sets out how those steps work in practice, down to who checks in with whom.

Northern Ireland has its own equivalent duties, under the Health and Safety at Work (Northern Ireland) Order 1978 and the Management of Health and Safety at Work Regulations (Northern Ireland) 2000.

Who counts as a lone worker?

INDG73 says lone workers exist in all sectors. The test is the lack of close or direct supervision, so someone can be a lone worker on a site full of people.

Where they workExamples HSE gives
Alone at a fixed baseShops, petrol stations, factories, warehouses and leisure centres
Apart from others on the same premises, or outside normal hoursSecurity staff, cleaners, and maintenance and repair staff
At homeHomeworkers
Away from a fixed baseDelivery drivers, engineers, care workers visiting people's homes, sales and service staff visiting premises, and agricultural and forestry workers

Contractors count too. HSE's lone working guidance says the duty to manage the risks before people work alone applies to anyone contracted to work for you, including self-employed people.

What should a lone working policy include?

The structure below follows the points INDG73 asks employers to cover. Write each section about your own roles, sites and shifts. A policy written in general terms gives the person on their own at 2am very little to act on.

SectionWhat it should say
ScopeWhich roles, sites, shifts and tasks involve working alone, including home and mobile workers and contractors
ResponsibilitiesWho owns the policy, who carries out the risk assessment, who monitors lone workers on each shift, and what lone workers must do themselves
Risk assessmentHow lone work is covered in your general risk assessment, and when that assessment is reviewed
Work that needs a second personThe tasks your assessment says must have someone else present
Keeping in touchCheck-in times, the method (phone, radio or alarm device), who receives each check-in, and how you confirm the worker has returned to base or home
A missed check-inWho acts, how soon, what they try first, and at what point they call the emergency services
Emergencies and first aidProcedures for fire, illness, injury and equipment failure, and whether lone workers carry a first aid kit
Training and supervisionWhat someone must be trained in before working alone, the limits on what they can do alone, and supervision for new starters
Violence and personal safetyCash handling, late and early shifts, enforcing rules with customers, and the training and alarm devices that go with them
Health and wellbeingMedical suitability to work alone, and the regular contact that supports mental health
ReportingHow lone workers report incidents and near misses, and how reports feed back into the assessment
ReviewA set review date, plus a review after any incident and whenever people, processes or equipment change

Work that needs a second person

INDG73 lists high-risk work where at least one other person may need to be present:

  • work in a confined space, where a supervisor may need to be present along with someone dedicated to the rescue role
  • work near exposed live electricity conductors
  • diving operations, vehicles carrying explosives, and fumigation

Your own assessment adds to that list. INDG73 asks whether the work involves operating equipment alone or lifting objects too large for one person, and whether there is a safe way in or out for one person outside normal hours.

Keeping in touch

INDG73 describes several ways to monitor lone workers: supervisors visiting and observing, pre-agreed intervals of regular contact by phone, radio or email, devices that raise the alarm manually or automatically, and a system that confirms the worker has returned to base or home once the work is finished. It also asks you to test these systems and your emergency procedures regularly.

A check-in protects someone only when a named person is waiting for it, with an agreed time to act if it is missed. Put both in the policy and on the rota.

How do you carry out a lone working risk assessment?

Start from your existing risk assessment and add the questions INDG73 asks about the person, the place and the work.

AreaQuestions to answer
The personHow experienced are they in the role and in working alone? Have they had the relevant training? Are they more vulnerable, for example because they are young, pregnant, disabled or a trainee? Is there a medical reason to seek advice before they work alone?
The place and equipmentIs the site rural or isolated? Are they going into someone else's home or premises? Is there a safe way in and out for one person outside normal hours? Do they have a reliable way to call for help?
The workDo they hold authority over customers or enforce rules? Do they handle cash, ask for payment or remove goods or property?
EmergenciesWhat happens if they are taken ill, have an accident, or face a fire or an equipment failure with nobody nearby?

Where an answer points to a risk, the control goes into the assessment and the policy. INDG73 says the level of supervision is a management decision based on the risk assessment: the higher the risk, the greater the supervision. It suggests a lone worker may need to be accompanied at first when they are new to the job, being trained, doing a job with specific risks, or dealing with a new situation.

The night shift on a petrol forecourt shows why the order matters. Cash handling, a wet forecourt and a spill at 2am all land on one person, so the induction has to come before the first solo shift. Our page on health and safety for petrol forecourts sets out the other risks on those sites.

Some lone work cannot be planned in full before it starts. INDG73 says that where your assessment expects a lone worker to make dynamic risk assessments, they must be trained to make them, consider the range of control measures, and get support for their decisions. Our guide to dynamic risk assessment explains how to set that up.

First aid comes out of the same exercise. INDG73 says your assessment may show that some lone workers should carry first aid equipment or need first aid training, including how to give first aid to themselves. Record that decision in your first aid needs assessment.

The managers who write these assessments also decide how lone working runs on the ground. Opus runs one-day risk assessment training at your premises, and the practical work uses your own templates.

Opus's consultants write risk assessments and health and safety policies for your sites as part of the Opus Safety Partnership, and our outsourced health and safety service includes policy and procedure reviews.

Frequently asked questions

Is it legal to work alone? Yes. HSE says it will often be safe to work alone, provided you have thought about and dealt with the risks before anyone does.

Is there a specific law on lone working? There is no single lone working law. In England, Wales and Scotland the duties come from the Health and Safety at Work etc. Act 1974 and the Management of Health and Safety at Work Regulations 1999, which HSE's INDG73 names as the law behind its guidance. Northern Ireland has its own equivalent legislation.

Do I need a lone working policy? The law requires the duties behind one, whatever you call the document. If you employ five or more people, you must record the significant findings of your risk assessment and your health and safety arrangements, and prepare a written health and safety policy statement. A lone working policy sets out the lone working part of those in one place.

Do I need a separate lone working risk assessment? No. INDG73 says there is no legal requirement for a separate one, but the risks to lone workers must be included in your general risk assessment, with the steps you take to control them.

Who is classed as a lone worker? Anyone who works by themselves without close or direct supervision. That includes staff alone in a shop or warehouse, cleaners and security staff working out of hours, homeworkers, and drivers, engineers and care workers who work away from a fixed base.

What work should never be done alone? HSE lists high-risk work where at least one other person may need to be present: work in a confined space, work near exposed live electricity conductors, diving operations, vehicles carrying explosives, and fumigation. Your own risk assessment may add tasks to that list.

How often should you check on a lone worker? As often as your risk assessment says. INDG73 gives no fixed interval. It asks for pre-agreed intervals of regular contact and a system to confirm the worker has returned to base or home, with closer supervision as the risk rises.

Can a new starter or a young worker work alone? Only once your assessment supports it. INDG73 suggests accompanying people at first when they are new to a job or being trained. In Great Britain, regulation 3(4) of the Management of Health and Safety at Work Regulations 1999 requires you to assess the risks to young persons before you employ one, taking account of their inexperience and lack of awareness of risks.

Ian Hatherly
Director
Ian Hatherly

Last updated

November 16, 2026

Why businesses choose
Opus Safety
Get in touch
Blog

Health & safety insights

Guidance, updates and practical advice for your sector.

Two office colleagues with documents and a tablet, planning workplace first aid cover
Health and safety consultant reviewing a checklist on a clipboard in a warehouse
Winter safety checklist: A practical guide for yards, warehouses, and outdoor workers
Driving safety forward: Are your delivery drivers at risk?
Workplace violence and abuse: How to protect your employees
Blog

First aid needs assessment: what it decides and how many first aiders you need

A first aid needs assessment decides your kit, whether an appointed person is enough and how many first aiders you need, using HSE's suggested numbers.

Blog

Dynamic risk assessment: meaning, the law and examples

A dynamic risk assessment is a trained worker's check as conditions change: carry on, add a control or stop. It never replaces your risk assessment.

Blog

Workplace violence and abuse: How to protect your employees

Violence and abuse against retail staff is increasing. Take vital steps to safeguard and empower your team.

Blog

Winter safety checklist: A practical guide for yards, warehouses, and outdoor workers

Cold weather compliance guidance for yards, warehouses and outdoor workers, from gritting strategies through to suitable PPE.

Blog

Driving safety forward: Are your delivery drivers at risk?

Get proven advice to keep drivers safe on every drop – plus practical tips covering compliant loading, lone working, route planning, and more.

Checkmark Icon
BMF Preferred Supplier
Former Health and Safety Inspectors

Why businesses choose
‍Opus Safety

We've worked across UK industry for years. The numbers show what our clients achieve when compliance becomes a strength, not a burden.